completed
Flickering light from LED lighting can cause a stroboscopic effect and increase the risk of accidents, for example when moving machine parts are in operation. When working on a circular saw, for instance, the saw blade may appear to be standing still due to the stroboscopic effect. In such cases, the light must be flicker-free.
The Department of Lighting Technology at the Technical University of Ilmenau has now carried out a study on behalf of BG ETEM to investigate the extent to which the stroboscopic effect is perceptible when using dimmable office lights. The study demonstrated a clear influence of frequency on the perception of the stroboscopic effect. Illuminance, on the other hand, was not a factor.
In laboratory experiments, a black dot on a turntable was moved at the usual speed of hand movements. The light was varied in terms of illuminance, pulse width modulation (PWM) frequency, the on/off ratio (duty cycle) and the modulation depth. For each scenario, the subjects were asked to state whether they could detect the light flickering.
Younger participants are more sensitive to flicker. With a black dot on a white background, frequencies up to 1,000 Hz were still detectable with a 25 per cent probability. It is therefore recommended that the limit values be revised, particularly for the dimmed state.
In general, the requirements of technical workplace regulation ASR A3.4 on lighting apply to office workstations. Since 1 September 2021, EU Regulation 2019/2020 has specified ecodesign requirements for light sources. It also contains limit values for light flicker and stroboscopic effects from undimmed LEDs and OLEDs. Based on the results of the research project, the Technical University of Ilmenau recommends supplementing the existing limit values and avoiding dimming by pulse-width modulation at frequencies below 1,000 Hz wherever possible.
-cross sectoral-
Type of hazard:design of work and technology, work-related health hazards, unfavorable, adverse work environment
Catchwords:lighting, radiation, ergonomics
Description, key words:Flicker, light, stroboscopic effect, accident hazard, perception, migraine